Autodesk AUTOCAD 2006, Command Reference Manual, Page: 200 / 1490

Evaluate associated actions when parameter is edited by another action? [Yes/No]
<No>: Enter y or press ENTER
Description
Specifies the description for the custom property name (parameter label). This
description is displayed in the Properties palette when you select the parameter
in the Block Editor. In a drawing, when you select the custom property name
(parameter label) for the block reference in the Properties palette, the
description is displayed at the bottom of the Properties palette.
Enter property description: Enter a description for the parameter
Palette
Specifies whether or not the parameter label is displayed in the Properties
palette when the block reference is selected in a drawing.
Display property in Properties palette? [Yes/No] <Yes>: Enter n or press ENTER
Value Set
Specifies a value set for the parameter. Limits the available values for the
parameter in a block reference to the values specified in the set.
Enter angle value set type [None/List/Increment] <None>: Specify an angle value
set type or press ENTER to specify no value set type
List
Specifies a list of available values for the parameter in a block reference.
Enter list of angle values (separated by commas):
Increment
Specifies a value increment and minimum and maximum values for the
parameter angle in the block reference.
Enter angle increment:
Enter minimum angle:
Enter maximum angle:
Flip
Adds a flip parameter to the current dynamic block definition. Defines a
custom flip property for the block reference. A flip parameter flips objects. In
the Block Editor, a flip parameter displays as a reflection line. Objects can be
flipped about this reflection line. A flip parameter displays a value that shows
if the block reference has been flipped or not. You associate a flip action with
a flip parameter.
176 | Chapter 4