manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 173 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 173

XY Stretch Box Set

Runs the BPARAMETER command, XY parameter option with four grips
specified, which adds an XY parameter to the dynamic block definition.
Automatically adds four stretch actions, one associated with each key point
on the XY parameter.

XY Array Box Set

Runs the BPARAMETER command, XY parameter option with four grips
specified, which adds an XY parameter to the dynamic block definition.
Automatically adds an array action associated with the XY parameter.

Rotation Set

Runs the BPARAMETER command, Rotation parameter option with one
grip specified, which adds a rotation parameter to the dynamic block
definition. Automatically adds a rotation action associated with the rotation
parameter.

Flip Set

Runs the BPARAMETER command, Flip parameter option with one grip
specified, which adds a flip parameter to the dynamic block definition.
Automatically adds a flip action associated with the flip parameter.

Visibility Set

Runs the BPARAMETER command, Visibility parameter option with one
grip specified, which adds a visibility parameter to the dynamic block
definition and allows visibility states to be defined. No action is necessary
with the visibility parameter.

Lookup Set

Runs the BPARAMETER command, Lookup parameter option with one grip
specified, which adds a lookup parameter to the dynamic block definition.
Automatically adds a lookup action associated with the lookup parameter.

BEDIT Command Line

If you select a block in a drawing and enter 

-bedit

 on the command line,

opens the selected block in the “Block Editor” on page 139. If nothing is selected,
the following prompt is displayed:

Enter “Block Name” on page 150 or [“?—List Previously Defined Blocks” on page
150]: Enter a name or  ?

BEDIT Command Line | 149

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments