manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 334 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 334

DDEDIT

Edits single-line text, dimension text, attribute definitions, and feature control frames

Text toolbar:

Modify menu: Object 

➤ 

Text 

➤ 

Edit

Double-click a text object.

Shortcut menu:

Select a text object, right-click in the drawing area, and click

Edit.

Command line:

ddedit

Object Selection or [Undo]:

Object Selection

Displays the appropriate editing method for the type of text you select:

■

Text created using TEXT or DTEXT displays the In-Place Text Editor
without the Text Formatting toolbar and the ruler. Right-click to display
“Text Shortcut Menu” on page 1193.

■

Text created using MTEXT displays the In-Place Text Editor.

■

Attribute definitions (not part of a block definition) display the Edit
Attribute Definition Dialog Box.

■

Feature control frames display the Geometric Tolerance Dialog Box.

DDEDIT repeats the prompt until you press  ENTER  to end the command.

Undo

Returns the text or attribute definition to its previous value. You can use
this option immediately after editing.

Edit Text Dialog Box

Shortcut menu:

Select a text object, right-click in the drawing area, and click

Edit.

Command line:

ddedit

310 | Chapter 6   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments