manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1095 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 1095

NOTE

Only sheet views created in AutoCAD 2005 or later are listed on the View

List tab.

This tab has the following buttons:

New View Category Button

Displays the View Category Dialog BoxView Category dialog box. This button
is available only when the View by Category button is turned on and the views
are displayed according to their categories.

View by Category

Displays the views in the current sheet set organized by their categories.

View by Sheet

Displays a list of views in the current sheet set organized by the sheet on which
they are located.

Shortcut Menu Options

The following options are displayed on shortcut menus for the View List tab.
For easier access, they are listed in alphabetical order. The options displayed
in each shortcut menu depend on context: if you right-click the sheet set, a
different shortcut menu will display than if you right-click a view category,
or a view.

Display

Displays the selected view in the sheet in which it was created. Opens the
drawing file containing the sheet, if the drawing file is not already open.

New View Category

Displays the View Category Dialog Box, in which you can create a new view
category to organize the views in a sheet set.

Place Callout Block

Specifies and places a callout block onto a sheet.

Place View Label

Specifies and places a view label block onto a sheet.

Properties (Sheet Set)

Displays the Sheet Set Properties Dialog Box.

Sheet Set Manager | 1071

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments