Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1122 / 1490

YZ
Aligns the cutting plane with the YZ plane of the current UCS. Specifying a
point defines the location of the cutting plane.
Specify a point on the YZ-plane <0,0,0>: Specify a point (1) or press ENTER
1
sliced object YZ cutting plane
You can retain both halves of the sliced solids or just the half you specify. The
sliced solids retain the layer and color properties of the original solids.
Specify a point on the desired side of the plane or [keep Both sides]: Specify a point
(1) or enter b
The descriptions of the Point on the Desired Side of the Plane and Keep Both
Sides options match the descriptions of the corresponding options under 3
Points.
ZX
Aligns the cutting plane with the ZX plane of the current UCS. Specifying a
point defines the location of the cutting plane.
Specify a point on the ZX-plane <0,0,0>: Specify a point (1) or press ENTER
Specify a point on the desired side of the plane or [keep Both sides]: Specify a point
or enter b
If a single solid is sliced into more than two objects, one solid is created from
the objects on one side of the plane and another solid is created from the
objects on the other side.
1098 | Chapter 20