manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 876 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 876

repositioned in 3D

space

M = up/down

N = right/left

vertex to edit

Next

Moves the X marker to the next vertex. The marker does not wrap around
from the end to the start of the mesh, even if the mesh is closed.

Previous

Moves the X marker to the previous vertex. The marker does not wrap
around from the start to the end of the mesh, even if the mesh is closed.

Left

Moves the X marker to the previous vertex in the N direction. The marker
does not wrap around from the start to the end of the mesh, even if the
mesh is closed.

Right

Moves the X marker to the next vertex in the N direction. The marker does
not wrap around from the end to the start of the mesh, even if the mesh is
closed.

Up

Moves the X marker to the next vertex in the M direction. The marker does
not wrap around from the end to the start of the mesh, even if the mesh is
closed.

Down

Moves the X marker to the previous vertex in the M direction. The marker
does not wrap around from the start to the end of the mesh, even if the
mesh is closed.

Move

Repositions the vertex and moves the editing mark.

Specify new location for marked vertex: Specify a point

852 | Chapter 17   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments