Autodesk AUTOCAD 2006, Command Reference Manual, Page: 762 / 1490

Exit
Exits the OFFSET command.
Multiple
Enters the Multiple offset mode, which repeats the offset operation using
the current offset distance.
Undo
Reverses the previous offset.
Through
Creates an object passing through a specified point.
Select object to offset or <exit>: Select one object or press ENTER to end the
command
Specify through point or [Exit/Multiple/Undo]<exit or next object>: Specify a point
(1) through which you want the offset object to pass or enter a distance
object selected
through point object offset
1
Exit
Exits the OFFSET command.
Multiple
Enters the Multiple offset mode, which repeats the offset operation and
accepts additional through points.
Undo
Reverses the previous offset.
Erase
Erases the source object after it is offset.
Erase source object after offsetting? [Yes/No]<current>: Enter y or n
738 | Chapter 16