Autodesk AUTOCAD 2006, Command Reference Manual, Page: 132 / 1490

Modify II toolbar:
Command line: attsync
Enter an option [?/Name/Select] <Select>:
You are prompted for the names of blocks you want to update with the current
attributes defined for the blocks. ATTSYNC does not change any values assigned
to attributes in existing blocks.
Entering ? displays a list of all block definitions in the drawing. Enter the
name of the block you want to update.
Pressing ENTER allows you to use your pointing device to select the block
whose attributes you want to update.
If a block you specify does not contain attributes or does not exist, an error
message is displayed, and you are prompted to specify another block.
AUDIT
Evaluates the integrity of a drawing and corrects some errors
File menu: Drawing Utilities
➤
Audit
Command line: audit
Fix any errors detected? [Yes/No] <N>: Enter y or n , or press ENTER
For easy access, AUDIT places all objects for which it reports errors in the
Previous selection set. However, editing commands affect only the objects
that belong to the current paper space or model space.
If you set the AUDITCTL system variable to 1, AUDIT creates an ASCII file
describing problems and the action taken and places this report in the same
directory as the current drawing, with the file extension .adt.
If a drawing contains errors that AUDIT cannot fix, use RECOVER to retrieve
the drawing and correct its errors.
108 | Chapter 3