Autodesk AUTOCAD 2006, Command Reference Manual, Page: 196 / 1490

in the Block Editor. In a drawing, when you select the custom property name
(parameter label) for the block reference in the Properties palette, the
description is displayed at the bottom of the Properties palette.
Enter property description: Enter a description for the parameter
Palette
Specifies whether or not the parameter label is displayed in the Properties
palette when the block reference is selected in a drawing.
Display property in Properties palette? [Yes/No] <Yes>: Enter n or press ENTER
Value Set
Specifies a value set for the parameter. Limits the available values for the
parameter in a block reference to the values specified in the set.
Enter distance value set type [None/List/Increment] <None>: Specify a distance
value set type or press ENTER to specify no value set type
Enter angle value set type [None/List/Increment] <None>: Specify an angle value
set type or press ENTER to specify no value set type
List
Specifies a list of available values for the parameter in a block reference.
Enter list of distance values (separated by commas):
Enter list of angle values (separated by commas):
Increment
Specifies a value increment and minimum and maximum values for the
parameter distance in the block reference.
Enter distance increment:
Enter minimum distance:
Enter maximum distance:
Specifies a value increment and minimum and maximum values for the
parameter angle in the block reference.
Enter angle increment:
Enter minimum angle:
Enter maximum angle:
XY
Adds an XY parameter to the current dynamic block definition and defines
custom horizontal and vertical distance properties for the block reference.
You associate a move, scale, stretch, or array action with an XY parameter.
172 | Chapter 4