manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 666 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 666

Markups

Displays loaded markup sets. The top-level node in the tree view represents
the currently loaded markup set. A drawing sheet node is displayed for each
drawing sheet that has associated markups. Any sheets that were added to the
DWF file in Autodesk DWF Composer are listed in italics. Each markup is
displayed as an individual node under its corresponding drawing sheet. The
icon associated with each markup represents the status of the markup. You
can double-click any of the markups in the tree view to view the associated
drawing sheet in the drawing area. When you double-click either a sheet that
was added in Autodesk DWF Composer or a markup for that sheet, that sheet
in the DWF file will open in Autodesk DWF Viewer (or in Autodesk DWF
Composer, if you have it installed).

Markup Shortcut Menu Options (Markup Set Node)

Right-clicking a markup set node in the Markups area displays the following
shortcut menu options.

Markup Shortcut Menu Options (Drawing Sheet Node)

Right-clicking a drawing sheet node in the Markups area displays the following
shortcut menu options.

Markup Shortcut Menu Options (Markup Node)

Right-clicking an individual markup node in the Markups area displays the
following shortcut menu options.

Show All Sheets/Hide Non-Markup Sheets

Displays all sheets in the marked-up DWF file in the tree view of the Markup
Set Manager, or hides the sheets that do not have associated markups.

Markup Details

Provides information about the currently selected node (markup set, drawing
sheet, or individual markup) in the Markups area.

When an individual markup is selected in the Markups area, Markup Details
displays the status of the markup. You can change the status.

The Markup History area (in the lower portion of the Markup Details area)
provides a noneditable history log of the selected markup in reverse
chronological order. In the Notes area, just below the Markup History area,
you can add notes and comments that are automatically saved with the
markup.

642 | Chapter 14   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments