Autodesk AUTOCAD 2006, Command Reference Manual, Page: 679 / 1490

Block
Places blocks at a specified interval along the selected object.
Enter name of block to insert: Enter the name of a block currently defined in the
drawing
Align block with object? [Yes/No] <Y>: Enter y or n or press ENTER
If you enter y , the block is rotated about its insertion point so that its
horizontal lines are aligned with, and drawn tangent to, the object being
measured. If you enter
n , the block is always inserted with a 0 rotation
angle.
Specify length of segment:
After you specify the segment length, the block is inserted at the specified
interval. If the block has variable attributes, these attributes are not included.
MENU
Loads a customization file
Command line: menu
The Select Customization File dialog box (a Standard File Selection Dialog
Boxes) is displayed. Enter or select a customization file name. When you press
ENTER or choose Open, the named file is loaded.
A customization file is an XML-based file containing the menus, toolbars, tool
palettes, and other interface elements that you can customize.
You can create a customized menu file and use MENU or CUI to load the file.
MENULOAD
Loads partial menu files
Command line: cuiload
The Load/Unload Customizations Dialog Box is displayed.
Load/Unload Customizations Dialog Box
Command line: cuiload
Controls the display of customization groups and interface elements.
Load/Unload Customizations Dialog Box | 655