Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1139 / 1490

face selected face deleted
1
Copy
Copies faces as a region or a body. If you specify two points, SOLIDEDIT uses
the first point as a base point and places a single copy relative to the base
point. If you specify a single point (usually entered as a coordinate) and then
press ENTER , SOLIDEDIT uses the coordinate as the new location.
Select faces or [Undo/Remove]: Select one or more faces
The descriptions of the Undo, Remove, Add, and All options match the
descriptions of the corresponding options under Extrude. After you select faces
or enter an option, the following prompt is displayed:
Select faces or [Undo/Remove/ALL]: Select one or more faces (1), enter an option,
or press ENTER
Specify a base point or displacement: Specify a base point (2)
Specify a second point of displacement: Specify a point (3)
face selected
base point and second
point selected
face copied
1
3
2
Color
Changes the color of faces.
Digital Signature Contents Dialog Box | 1115