manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 658 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 658

Default

Controls the DEFAULT lineweight for layers. The initial DEFAULT lineweight
is 0.01 inches or 0.25 mm. (LWDEFAULT system variable)

Adjust Display Scale

Controls the display scale of lineweights on the Model tab. On the Model tab,
lineweights are displayed in pixels. Lineweights are displayed using a pixel
width in proportion to the real-world unit value at which they plot. If you
are using a high-resolution monitor, you can adjust the lineweight display
scale to better display different lineweight widths. The Lineweight list reflects
the current display scale.

Objects with lineweights that are displayed with a width of more than one
pixel may increase regeneration time. If you want to optimize performance
when working in the Model tab, set the lineweight display scale to the
minimum value or turn off lineweight display altogether.

LWEIGHT Command Line

If you enter

 -lweight

 at the Command prompt, LWEIGHT displays prompts

on the command line.

Current lineweight: current
Enter Default Lineweight for new objects or [?—List Lineweights]: Enter a valid
lineweight or enter  ?

The current lineweight value is displayed; if the value is not BYLAYER,
BYBLOCK or DEFAULT, the value is displayed in millimeters or inches.

Default Lineweight

Sets the current default lineweight. Lineweight values consist of fixed
settings, including BYLAYER, BYBLOCK, and DEFAULT. Values are calculated
in either inches or millimeters; millimeters are the default. If you enter a
valid lineweight value, the current default lineweight is set to the new value.
If you enter any other value, the default is set to the nearest valid value.

To plot an object with a lineweight that is not found in the list of fixed
lineweight values, you can use the Plot Style Table Editor to customize
plotted lineweights. See Control Plotted Lineweight and Linetype in the
User’s Guide. The DEFAULT value is set by the LWDEFAULT system variable
and has an initial value of 0.01 inches or 0.25 mm. The lineweight value
of 0 plots at the thinnest lineweight available on the specified plotting
device and is displayed at a value of one pixel in model space.

634 | Chapter 13   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments