Autodesk AUTOCAD 2006, Command Reference Manual, Page: 576 / 1490

Y
Sets the Y scale factor.
Specify Y scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
Z
Sets the Z scale factor.
Specify Z scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
Rotate
Sets the angle of insertion for the block.
Specify rotation angle <0>:
Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
enter an option, or press ENTER
The descriptions of the X Scale Factor, Corner, and XYZ options under Rotation
match the descriptions of the corresponding options under Insertion Point.
PScale
Sets the scale factor for the X, Y, and Z axes to control the display of the block
as it is dragged into position.
Specify preview scale factor for XYZ axes: Enter a nonzero value
Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
enter an option, or press ENTER
The descriptions of the X Scale Factor, Corner, and XYZ options under PScale
match the descriptions of the corresponding options under Insertion Point.
PX
Sets the scale factor for the X axis to control the display of the block as it is
dragged into position.
Specify preview X scale factor: Enter a nonzero value
Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
enter an option, or press ENTER
552 | Chapter 11