Autodesk AUTOCAD 2006, Command Reference Manual, Page: 339 / 1490

Command line: detachurl
Select objects: Use an object selection method, and press ENTER to end selection
Hyperlinks are removed from the selected objects. If an area is selected, the
polyline is deleted. You can use PURGE to remove the URLLAYER layer.
DIM and DIM1
Accesses Dimensioning mode
Command line: dim or dim1
Dim: Enter a Dimensioning mode command
The Dim prompt indicates that you’re in Dimensioning mode, in which you
can use a special set of “Dimensioning Mode Commands” on page 315. (DIM
and DIM1 are provided only for compatibility with previous releases.)
Use DIM to remain in Dimensioning mode after you have used a dimensioning
command. Use DIM1 to execute a dimensioning command and immediately
return to the Command prompt. To exit Dimensioning mode, enter
e or exit ,
or press ESC .
Dimensioning Mode Commands
The following commands are available at the DIM prompt.
Dimensioning mode commands
Description Command
Exits Dimensioning mode and returns to the Command prompt. You
can also press ESC to exit Dimensioning mode. EXIT
Redraws the current viewport. REDRAW
Changes the current text style. STYLE
Erases the most recently created dimension objects and cancels any
new dimension system variable setting. When you exit Dimensioning
mode, UNDO reverses the effects of the entire dimensioning session. UNDO or U
The following table shows which AutoCAD commands are equivalent to the
rest of the Dimensioning mode commands. For information about these
Dimensioning mode commands, see the equivalent AutoCAD command.
Viewpoint Presets Dialog Box | 315