Autodesk AUTOCAD 2006, Command Reference Manual, Page: 842 / 1490

Hide Paperspace Objects
Specifies whether the HIDE operation applies to objects in the paper space
viewport. This option is available only from a layout tab. The effect of this
setting is reflected in the plot preview, but not in the layout.
Icon
Displays a DWG icon when the Page Setup dialog box is opened from a
layout, and displays a sheet set icon when the Page Setup dialog box is
opened from the Sheet Set Manager.
Icon
Indicates the media orientation of the selected paper and represents the
orientation of the drawing on the page as a letter on the paper.
Inch(es) =/mm =/Pixel(s) =
Specifies the number of inches, millimeters, or pixels equal to the specified
number of units.
Inch/mm/pixel
Specifies inches or mm for display of units in the Plot dialog box. The default
is based on the paper size and changes each time a new paper size is selected.
Pixel is available only when a raster output is selected.
Landscape
Orients and plots the drawing so that the long edge of the paper represents
the top of the page.
Layout/Limits
When plotting a layout, plots everything within the printable area of the
specified paper size, with the origin calculated from 0,0 in the layout.
When plotting from the Model tab, plots the entire drawing area that is
defined by the grid limits. If the current viewport does not display a plan
view, this option has the same effect as the Extents option.
818 | Chapter 17