Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1142 / 1490

Exit
Exits the face-editing options and displays the Enter a Solids Editing Option
prompt.
Body
Edits the entire solid object by imprinting other geometry on the solid,
separating the solid into individual solid objects, shelling, cleaning, or checking
the selected solid.
Enter a body editing option [Imprint/seParate solids/Shell/cLean/Check/Undo/eXit]
<eXit>: Enter an option or press ENTER
Imprint
Imprints an object on the selected solid. The object to be imprinted must
intersect one or more faces on the selected solid in order for imprinting to be
successful. Imprinting is limited to the following objects: arcs, circles, lines,
2D and 3D polylines, ellipses, splines, regions, bodies, and 3D solids.
Select a 3D solid: Select an object (1)
Select an object to imprint: Select an object (2)
Delete the source object <N>: Enter y or press ENTER
Select an object to imprint: Select an object or press ENTER
solid selected object selected object imprinted on
solid
1
2
Separate Solids
Separates 3D solid objects with disjointed volumes into independent 3D solid
objects.
Select a 3D solid: Select an object
NOTE Separating solids does not separate Boolean objects that form a single
volume.
1118 | Chapter 20