Autodesk AUTOCAD 2006, Command Reference Manual, Page: 896 / 1490

Units
Specifies the number of units equal to the specified number of inches,
millimeters, or pixels.
View
Plots a view that was previously saved with the VIEW command. You can
select a named view from the list. If there are no saved views in the drawing,
this option is unavailable.
When the View option is selected, a View list is displayed that lists the
named views that are saved in the current drawing. You can select a view
from this list to plot.
Where
Displays the physical location of the output device specified in the currently
selected page setup.
Window
Plots any portion of the drawing that you specify. When you select Window,
the Window button becomes available. Click the Window button to use
the pointing device to specify the two corners of the area to be plotted, or
enter coordinate values.
Specify first corner: Specify a point
Specify other corner: Specify a point
X
Specifies the plot origin in the X direction relative to the setting of the Plot
Offset Definition option.
Y
Specifies the plot origin in the Y direction relative to the setting of the Plot
Offset Definition option.
Printer/Plotter
Specifies a configured plotting device to use when plotting layouts.
If the selected plotter doesn’t support the layout’s selected paper size, a warning
is displayed and you can select the plotter's default paper size or a custom
paper size.
872 | Chapter 17