manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1062 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 1062

Command line:

scaletext

Select objects: Use an object selection method, and press  ENTER  when you finish
Enter a base point option for scaling
[Existing/Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR]<Existing>:
Specify a location to serve as a base point for scaling

With the base point prompt, you choose one of several locations to serve as
base points for scaling, which is used individually for each selected text object.
The base point for scaling is established on one of several insertion point
locations for text options, but even though the options are the same as when
you choose an insertion point, the justification of the text objects is not
affected.

The base point options shown above are decribed in the TEXT command. The
base point options for single line text are similar to those for multiline text
except that the Align, Fit, and Left text options are equivalent to the bottom
left (BL) multiline text attachment point.

Specify text height or [Match Object/Scale Factor]<0.5000>: Specify a text height
or enter an option

Match Object

Scales the text objects that you originally selected to match the size of a selected
text object.

Select a text object with the desired height: Select a text object to match

Scale Factor

Scales the selected text objects based on a reference length and a specified
new length.

Specify scale factor or [Reference]: Specify a scale factor or enter  r

Scale Factor

Scales the selected text objects using the numeric scale factor that you enter.

Reference

Scales the selected text objects relative to a reference length and a new
length.

Specify reference length <1>: Enter a length to serve as a reference distance
Specify new length: Enter another length in comparison to the reference length

The selected text is scaled by a ratio of the values that you entered for the
new length and the reference length. If the new length is less than the
reference length, the selected text objects are reduced in size.

1038 | Chapter 20   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments