TeleBoss 830 2.11.370 STD User Manual
Page 88
TeleBoss 830 - User Profile Security Settings
A) User 1: User1/********/COMMAND/FILE1
B) User 2: User2/********/COMMAND/FILE1
C) User 3: User3/********/PASSTHROUGH/FILE1
D) User 4: User4/********/PASSTHROUGH/FILE2
E) User 5:
F) User 6:
G) User 7:
H) User 8:
I) User 9:
J) User 10:
K) User 11: admin/********/COMMAND/FILE1
L) User 12:
M) Authentication Settings
All 12 User selections display the configuration menu for that user profile.
The Authentication Settings selection displays a menu of global authentication options. Authentication
Settings set parameters for passwords and security that are required for
every
user who attempts to log into
the TeleBoss.
User Setup Menu
Use this menu option to configure log in credentials as well as security access permissions for up to twelve
users.
TeleBoss 830 - User Setup Menu
A) Enable This User Access [ON]
B) User Name [admin]
C) Password [********]
D) Allow User Connection via [LMTFRW]
E) Upon Login then Go To [COMMAND]
F) File Access Pointer [FILE1]
G) Set Pass-through Pointer To [I/O 1]
H) Pass-through Permissions
I) After PT, ESC Takes User To [MENU]
J) PPP Connection [LOCAL]
K) Setup/Status Rights [MASTER]
L) File Release Permissions
M) File Delete Permissions
Enable This User Access
This is an ON/OFF toggle to enable access for this user profile.
User Name / Password
These options are used to set the username and/or password for this profile. Maximum length for each is 31
characters.
Note:
User 11 is preconfigured in the unit and is the default "MASTER" level username/password.
The User 11 username is
admin
, password:
password
. Please note that all passwords are not visible
in the menues and one must access the Settings Key file to see them in plain text.
