TeleBoss 830 2.11.370 STD User Manual
Page 139
Web Interface Restore Settings
1. Save the text file with settings you wish to transfer to this TeleBoss on a computer or server accessible by
the unit.
2. Log into the unit and, using the left hand menu, select Administration and then System Administration
from the submenu.
3. Use the Choose File button to navigate to your saved settings file and click "Open".
4. Click the Upload button and the settings will be installed immediately.
Note:
If you using a full settings file from another unit, remove or update settings that would not apply to
the new unit, such as the Ethernet IP settings, before transferring the file.
CLI Restore
Restore using Xmodem or ASCII
In order for the described [X]modem or [A]scii steps to work, a terminal emulator that supports XModem or
ASCII file transfer is required. An example of an open source emulator that supports these is TeraTerm
http://ttssh2.sourceforge.jp/index.html.en
). PuTTY does not.
Steps:
1. Establish a Telnet/SSH/Serial connection to the unit.
2. Issue the command
SK SET
3. Decide whether you will be using
[X]modem
or
[A]SCII
and follow the relevant instructions below.
Xmodem
After an SK set the TeleBoss will prompt "[X]modem or [A]scii?", press
X
for Xmodem. Using your
terminal emulator's menus find the option to send a file via Xmodem. For TeraTerm, click the "File"
option in the upper left corner and select "Transfer" then "XMODEM", then "Send". Use the pop up
