TeleBoss 830 2.11.370 STD User Manual
Page 29
To select a menu item enter the corresponding letter next to the item. You will be immediately taken to that
items configuration menu. Use <Enter> or <Esc> to go back a level, or <Ctrl+C> to return directly to the
command prompt.
Note:
Be aware that the <Esc> key is (by default) coded as the escape character for certain operations
(such as serial bypass). As such, there may be times where use of the <Esc> key to go back a level will
result in unexpected behavior.
There are several different types of inputs employed within the Setup menu. This section will discuss the
different types you will encounter.
String
The most common is the string type
of option you will find. Below is an example of a string entry:
A) Site Name [Test Site]
When selected, this setting will provide a prompt requesting a new value. You may press < Enter > or <ESC>
to abort the option entry or press <SPACE> and < Enter > to delete the current value and leave it blank.
Some numerical or required settings will not allow a user to leave an option blank, so pay attention to the
unit's response when attempting to delete a setting's value.
Toggle
The second most common option type is the toggle type option:
A) Enable Web Interface [OFF]
When selected, this option will not prompt for a new value. It will simply cycle to the next available option in
its list. This switch type is typically used for options with two or three choices. Most often it is in an ON/OFF
form, but could be a series of options such as "NONE", "1" and "2".
Option list
The option list type is similar to the toggle type in that it has a list of options to choose from. The letter
adjacent to the option would be selected to choose that option.
TeleBoss 830 - Serial Port 2 Baud Rate
A) 300
B) 600
C) 1200
D) 2400
E) 4800
F) 9600
G) 19200
H) 38400
I) 57600
J) 115200
