TeleBoss 830 2.11.370 STD User Manual
Page 135
SK HERE
allows you to set or get individual keys interactively. Typing just the key name will cause the value
to be displayed. Typing the key name plus a new value will set that key. The unit will keep prompting for a
new key or key/value pair until you press <Esc> or <Enter>.
SK LOG
displays a list of any errors generated during an SK Set.
SK <key>#:
displays a list of the possible values of a key, for example:
>sk serial.1.baud#
300,600,1200,2400,4800,9600,19200,38400,57600,115200
Downloaded settings always end with an
end
. When uploading any settings files to a unit the text file should
always end with the
end
.
Lines downloaded with a double slash,
//,
are notes. These lines will be ignored by the unit during a settings
upload.
SK GET A CUSTOM
// TeleBoss 830 Setting Key File created 03/28/18 12:30:08
// Product Version 2.11.370 STD
// Dictionary created 11/07/16 15:04:21
net.eth[1].mode= DHCP
net.eth[1].ip= 192.168.95.107
net.eth[1].mask= 255.255.254.0
net.eth[1].router= 192.168.95.1
net.hostname= asentria
net.web.timeout= 300
event.sensor[200].id= 0C000000
event.log.maxsize= 128
sys.sitename= 830-830001707
sys.timestamp.dateformat= BLANK
sys.timestamp.spaceafter= OFF
audit.log.maxsize= 128
end
SK Commands
Description
sk get
sk g
Dumps all Setting Keys followed by scripts. Setting Keys are
wrapped with XML-like header and footer text.
sk get custom
sk c
Dumps only the custom Setting Keys
– no scripts. Setting Keys are
not wrapped with XML-like header and footer text.
sk get status
sk ?
Dumps only the Status Keys
– no scripts. Status Keys are not
wrapped with XML-like header and footer text.
Status Keys
Status Keys are read-only keys that can be read using the command
SK [KEY]
. The current value of the key
will be displayed. These keys are different from the typical Settings keys in that they tell you the current
