manualshive.com logo in svg

ARM ARM1176JZF-S, Technical Reference Manual

The ARM ARM1176JZF-S Technical Reference Manual is a comprehensive user manual for the ARM1176JZF-S processor. Download this manual for free from manualshive.com, to gain valuable insights into the product's technical specifications, performance, and programming details. Enhance your understanding of this advanced processor with this detailed manual.

Share
Download
background image

List of Figures

ARM DDI 0301H

Copyright © 2004-2009 ARM Limited. All rights reserved.

xix

ID012310

Non-Confidential, Unrestricted Access

Figure 3-64

DMA Context ID Register format  ............................................................................................  3-120

Figure 3-65

Secure or Non-secure Vector Base Address Register format  ................................................  3-121

Figure 3-66

Monitor Vector Base Address Register format ........................................................................  3-122

Figure 3-67

Interrupt Status Register format ..............................................................................................  3-124

Figure 3-68

FCSE PID Register format ......................................................................................................  3-126

Figure 3-69

Address mapping with the FCSE PID Register .......................................................................  3-127

Figure 3-70

Context ID Register format  .....................................................................................................  3-128

Figure 3-71

Peripheral Port Memory Remap Register format ....................................................................  3-130

Figure 3-72

Secure User and Non-secure Access Validation Control Register format ..............................  3-132

Figure 3-73

Performance Monitor Control Register format  ........................................................................  3-133

Figure 3-74

System Validation Counter Register format for external debug request counter ....................  3-141

Figure 3-75

System Validation Cache Size Mask Register format .............................................................  3-145

Figure 3-76

TLB Lockdown Index Register format .....................................................................................  3-149

Figure 3-77

TLB Lockdown VA Register format .........................................................................................  3-149

Figure 3-78

TLB Lockdown PA Register format .........................................................................................  3-150

Figure 3-79

TLB Lockdown Attributes Register format  ..............................................................................  3-151

Figure 4-1

Load unsigned byte .....................................................................................................................  4-6

Figure 4-2

Load signed byte .........................................................................................................................  4-6

Figure 4-3

Store byte ....................................................................................................................................  4-7

Figure 4-4

Load unsigned halfword, little-endian  .........................................................................................  4-7

Figure 4-5

Load unsigned halfword, big-endian  ...........................................................................................  4-8

Figure 4-6

Load signed halfword, little-endian  .............................................................................................  4-8

Figure 4-7

Load signed halfword, big-endian  ...............................................................................................  4-9

Figure 4-8

Store halfword, little-endian ........................................................................................................  4-9

Figure 4-9

Store halfword, big-endian  ........................................................................................................  4-10

Figure 4-10

Load word, little-endian .............................................................................................................  4-10

Figure 4-11

Load word, big-endian  ..............................................................................................................  4-11

Figure 4-12

Store word, little-endian  ............................................................................................................  4-11

Figure 4-13

Store word, big-endian ..............................................................................................................  4-12

Figure 6-1

Memory ordering restrictions  ....................................................................................................  6-24

Figure 6-2

Translation table managed TLB fault checking sequence part 1  ..............................................  6-30

Figure 6-3

Translation table managed TLB fault checking sequence part 2  ..............................................  6-31

Figure 6-4

Backwards-compatible first-level descriptor format ..................................................................  6-37

Figure 6-5

Backwards-compatible second-level descriptor format .............................................................  6-38

Figure 6-6

Backwards-compatible section, supersection, and page translation  ........................................  6-38

Figure 6-7

ARMv6 first-level descriptor formats with subpages disabled ...................................................  6-39

Figure 6-8

ARMv6 second-level descriptor format  .....................................................................................  6-40

Figure 6-9

ARMv6 section, supersection, and page translation .................................................................  6-41

Figure 6-10

Creating a first-level descriptor address  ...................................................................................  6-44

Figure 6-11

Translation for a 1MB section, ARMv6 format  ..........................................................................   6-46

Figure 6-12

Translation for a 1MB section, backwards-compatible format  ..................................................  6-46

Figure 6-13

Generating a second-level page table address  ........................................................................  6-47

Figure 6-14

Large page table walk, ARMv6 format ......................................................................................  6-48

Figure 6-15

Large page table walk, backwards-compatible format ..............................................................  6-49

Figure 6-16

4KB small page or 1KB small subpage translations, backwards-compatible format ................  6-50

Figure 6-17

4KB extended small page translations, ARMv6 format .............................................................  6-51

Figure 6-18

4KB extended small page or 1KB extended small subpage translations, 
backwards-compatible format ...................................................................................................  6-52

Figure 7-1

Level one cache block diagram ..................................................................................................  7-4

Figure 8-1

Level two interconnect interfaces ................................................................................................  8-2

Figure 8-2

Channel architecture of reads .....................................................................................................  8-8

Figure 8-3

Channel architecture of writes ....................................................................................................  8-8

Figure 8-4

Swizzling of data and strobes in BE-32 big-endian configuration  .............................................  8-38

Figure 9-1

Processor clocks with no IEM  .....................................................................................................  9-3

Figure 9-2

Read latency with no IEM  ...........................................................................................................  9-4

Figure 9-3

Processor clocks with IEM  ..........................................................................................................  9-6

Figure 9-4

Processor synchronization with IEM  ...........................................................................................  9-6

Figure 9-5

Read latency with IEM  ................................................................................................................  9-8

Figure 9-6

Power-on reset ..........................................................................................................................  9-10

Figure 10-1

IEM structure .............................................................................................................................  10-8

Summary of Contents for ARM1176JZF-S
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ARM1176JZF-S

D-Link PCMCIA WIRELESS ASAPTER DWL-650 Quick Install Manual preview
PCMCIA WIRELESS ASAPTER DWL-650
Brand: D-Link Pages: 5
D-Link PowerLine DHP-W611AV User Manual preview
PowerLine DHP-W611AV
Brand: D-Link Pages: 78
dbx ProVocal Specifications preview
ProVocal
Brand: dbx Pages: 2
ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Brand: ICP DAS USA Pages: 8
Renesas Asynchronous SH7145F Application Note preview
Asynchronous SH7145F
Brand: Renesas Pages: 17
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Brand: Dentsply Sirona Pages: 91
T.A HALL 6370 Instruction Manual preview
HALL 6370
Brand: T.A Pages: 11
Barco Encore VPx Installation Manual preview
Encore VPx
Brand: Barco Pages: 30
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
NEC uPD75P3116 Datasheet preview
uPD75P3116
Brand: NEC Pages: 70
Kontron ePanel-C3 Technical Manual preview
ePanel-C3
Brand: Kontron Pages: 62
Renesas R0E424270CFLE0 User Manual preview
R0E424270CFLE0
Brand: Renesas Pages: 4
Uctronics U6187 Assembly Manual preview
U6187
Brand: Uctronics Pages: 12
Galileo Quark SoC X1000 Getting Started Manual preview
Quark SoC X1000
Brand: Galileo Pages: 20
Vxl IQL Series Hardware Installation Manual preview
IQL Series
Brand: Vxl Pages: 4
Paradyne Hotwire 7996 User Manual preview
Hotwire 7996
Brand: Paradyne Pages: 46
netsys NH-310S User Manual preview
NH-310S
Brand: netsys Pages: 38

Brands by name

Popular brands

Load more brands