Agilent Technologies 622Vu Advisor, User Manual

Page: 87 / 244

add the address(es) to the IP list. The arrows under the Flow column indicate
the selected direction of flow.
•
To change an address (or pair of addresses), first select the address(es) from
the list, then click Edit. 622Vu Advisor prompts for the changes using a
window similar to the one described above for an add.
•
As necessary, select an address (or pair of addresses), then click Remove to
delete it from the IP list.
When you’re through with the IP tab, click OK to save your settings.
Using the Decode Tab
During FilterSet Definition
Use the Decode tab to limit the capture
to only those cells/PDUs that use a
certain type of decode. By default,
622Vu Advisor captures all decodes.
1. Click Add to add a specific type of
decode to the list. 622Vu Advisor
opens a dialog box that lets you
enter a decode directly, or select one
from the drop-down list:
Click OK when you’re through, to add the decode to the list.
If you specify a type of decode that isn’t in the drop-down list, 622Vu
Advisor accepts (and uses) it as entered. 622Vu Advisor does not try to
verify user-specified values.
2. Click All to add all the decodes available in the drop-down list.
3. As necessary, select a type of decode and click Remove to delete it from the
list.
When you’re through with the Decode tab, click OK to save your settings.
6: Capturing Incoming Traffic
6.1 Starting a New Capture
87