Agilent Technologies 622Vu Advisor, User Manual

Page: 113 / 244

Switching Between a PDU and Cell-Level Display
The PDU Summary Mode button lets you toggle between a display of
individual cells, and one that condenses each PDU to a single line. Click the
PDU Summary Mode button as many times as you want, to toggle between a
display of PDU-level information and individual cells.
The title of the browser window changes to reflect the current setting (PDU
Browser vs. Cell Browser). The window on page 89 shows a cell-level display.
A PDU-level display looks like this:
This is a
PDU-level
display.
As appropriate with the PDU-level display, you’ll see protocol-specific
information in the PDU summary line, such as the LAN protocol (IP, IPX, etc.)
source and destination address. You can specify preferences for use in decoding
PDUs, through your user profile definition; specifically, you can indicate
particular VCCs that should be decoded in a certain way. See Specifying Decode
Preferences starting on page 100 for more information.
When you exit from 622Vu Advisor, the system remembers the current PDU
summary-mode setting. It stores the setting in the user profile, then initiates the
next capture display using the same setting.
Creating a Script From a Capture File
You can create a script from any previously stored capture file, or from a subset
of any previously stored capture file. In either case, 622Vu Advisor combines a
series of sequences to form the script, preserving the timing and delays from the
original cell transmission.
Note: If you want to edit any of the cells or the script itself, use 622Vu Advisor’s script editor to
view the script (including a list of sequences defined within the script), then use the
sequence editor to make any cell- or sequence-level modifications. Refer to page 177 for
PDU Summary
Mode
6: Capturing Incoming Traffic
6.3 Viewing Captured Traffic
113