Agilent Technologies 622Vu Advisor, User Manual

Page: 175 / 244

Using the Toolbar Buttons
Use the toolbar to direct script processing, referring to Table 10 for instructions.
Click to start
(transmit) the
script.
1
2
Depress before running the script, to set the script
to run repeatedly until you stop it (vs. only once).
Table 10. Script Execution Menu Commands and Toolbar Buttons
Menu Command Button Used to…
Start Script Start the script (i.e., begin transmission of the sequences in
the script). After you start the script, the elapsed-time
counter (right) becomes active, allowing you to track the time
since execution began:
Click to stop
script execution.
Amount of time the
script has been running.
The Stop Script button is also enabled, allowing you to stop
transmission at any time.
Pause Script Pause the script. Not currently implemented.
Stop Script Stop the script (only available during execution). When you
click this button, the Start button is enabled, allowing you to
restart the same script.
Run Continuous Indicate whether to execute the script once or continuously
(depressed for continuous execution). Even if you run the
script continuously, you can stop it at any time using the Stop
Script button.
Setup Script
Display the first window opened when you ran the script,
allowing you to respecify master header values and the
analysis device you want to use.
Configure Script
Monitor
Parameters Not used.
Print Log Not used.
Exit Exit from the script-execution window.
10: Running & Editing Scripts
10.1 Running a Script
175