Agilent Technologies 622Vu Advisor, User Manual

Page: 81 / 244

List of captured
PDUs or cells
(cells shown here).
Amount of time the capture has been running.
Number of PDUs/cells captured so far.
Percent of captured cells
uploaded to the Advisor
already.
Click to stop
the capture.
Analysis device where
you’re capturing traffic.
Filtering option in effect (CaptureAll in this case).
Temporary name
assigned to the capture.
The Auto Update Display button controls which of two options 622Vu Advisor
uses for the display:
•
With Auto Update Display OFF, 622Vu Advisor stops updating the
window after displaying the initial screen load of cells/PDUs (but continues
with its capture). Use the scroll bar to see the latest traffic captured in this
case; 622Vu Advisor updates the display automatically as you scroll
forward.
•
With Auto Update Display ON, 622Vu Advisor refreshes the display
continually, always showing the latest cells. The scroll bar is disabled when
you use this feature.
Click the Auto Update Display button to toggle your selection. 622Vu Advisor
remembers the last auto-update setting when it opens a user profile, and
continues with that setting unless you specify otherwise.
In the status bar (bottom of window), the Elapsed field indicates the amount of
time the capture has been running. The Captured field indicates the number of
PDUs/cells captured by the analysis device. While these PDUs/cells are on the
device, they are not necessarily loaded yet to your Advisor; the analysis device
typically captures traffic much faster than the traffic can be passed to the
Advisor. The Uploaded field (and corresponding blue bar) indicates the
percentage of captured cells/PDUs that have been forwarded to the Advisor
already.
Auto Update
Display
6: Capturing Incoming Traffic
6.1 Starting a New Capture
81