Agilent Technologies 622Vu Advisor, User Manual

Page: 10 / 244

1.1 622Vu Undercradle Description
The 622Vu undercradle supports testing an ATM network or device using an
OC-12c/STM-4c (SMF) interface. You can use a single-mode or a multi-mode
physical interface module in your undercradle.
Power
Sys
OK
Fault Port 1 Port 2
OC-12c/STM-4c
622 Mb/s SM
Port 1
Port 2
In Out
In Out
These LEDs indicate the
mode of operation:
top -- end-station
bottom -- monitor-only
These LEDs indicate an active (healthy) Port
top -- Port 1
bottom -- Port 2
SM -- Single-Mode module
MM -- Multi-Mode module
Active
Power
Undercradle Power On indicator.
Sys OK 622Vu Advisor software is running when light flashes.
Fault
There is a hardware or firmware problem.
Active The 622Vu Advisor application is talking to the undercradle.
Port 1
The undercradle is receiving ATM cells on Port 1.
(Dark indicates loss of cell delineation on that port.)
Port 2
The undercradle is receiving ATM cells on Port 2.
(Dark indicates loss of cell delineation on that port.)
Power DC Power connector for the power adapter.
Ethernet
Connects to the NIC card in the PC Card slot on the right side of
the Agilent Advisor via the supplied crossover Ethernet cable.
Console
Connects to the Serial port on the left side of the Agilent Advisor.
Use this connection if you need to troubleshoot the configuration
of the undercradle.
Right Side
Left Side
Power
Ethernet
Console
1: Installation and Configuration
1.1 622Vu Undercradle Description
10