Agilent Technologies 622Vu Advisor, User Manual

Page: 178 / 244

Defining the Specifics of the Script
The Script Steps panel lists all the steps in the script, in order as transmitted
during execution. There’s a repeat count for each step. You’ll use this area to
add or remove a step from the script, or to select a step to be modified.
Steps in the script, listed
in order as exectuted
when the script runs.
Click any step to edit its
content, or to shift it up
or down in the script.
Click the appropriate
button to shift the
selected step up or
down in the script.
Click to delete the
selected step.
Click to save the current step’s
definition (after changes).
Click to add a new
step to the script.
Use the buttons in this area to specify the type of processing you want:
Click To…
Add Add a new step to the script, positioning it just after the currently selected step.
Update Revise the definition of the currently selected step.
Remove Remove the selected step. 622Vu Advisor verifies your request before deleting the
step.
Up Shift the currently selected step up one position in the script.
Down Shift the currently selected step down one position in the script.
Each script begins with a Start step and ends with an End step. You can add any
combination of transmit and pause steps between these special markers. The top
of the Script Steps panel defines the currently selected step, or a new step you’re
defining.
Adding or Updating a Step in the Script
For a new or modified step, use the top of the Script Steps panel to define the
characteristics of the step. As identified by the Type field, each step is either a
Transmit (which sends a sequence out from the analysis device) or a Pause
(which pauses a specified amount of time).
When you’re through defining the characteristics of the step, click Add to add
the specifications as a new step, placing it just below the step that’s selected;
click Update to modify the currently selected step.
10: Running & Editing Scripts
10.2 Creating or Editing a Script
178