Agilent Technologies 622Vu Advisor, User Manual

Page: 190 / 244

traffic coming in over the same VCC as the one you’re using to transmit;
otherwise (to use a different VCC), unmark the check box.
If you mark this box, QoSMeter disables all fields on the Analysis tab
(described next).
Analysis Settings
Device over which to receive
and analyze the session
data.
VCC over which to
receive the session
data.
Click when you’re through with the definition (including
theTraffic Pattern and Options), to run the session.
For Analysis and Generation and Analysis type sessions, click the Analysis tab
and specify the following information. If you marked the Use the Same VCC for
Analysis box in the Generation tab, these fields are pre-filled and cannot be
changed.
•
Device on which to receive and analyze session data. For Generation and
Analysis mode, this field is disabled and always specifies the sending device.
•
VPI/VCI over which to receive the incoming session data.
•
If you’re running in Analysis mode only (vs. Generation and Analysis),
there’s one additional field:
Use this field to specify the channel over which to receive the incoming data:
12: Using QoSMeter
12.2 Defining a Constant Bit Rate (CBR) Session
190