Agilent Technologies 622Vu Advisor, User Manual

Page: 24 / 244

Configure Standard Modem
In the 622Vu Advisor’s start menu, the Console selection runs the Hyper-
Terminal application so you can view and configure the 622Vu undercradle’s
parameters.
Even though the connection from the Advisor to the 622Vu undercradle is a
direct serial connection, the Hyper-Terminal application requires a default
modem to be configured. To enable the Console selection to run without error,
you need to add a modem.
To add a modem:
1. Select Start | Settings | Control Panel, double click the Add New Hardware
icon, and then click Next.
2. At the prompt to search for new hardware, select No and then click Next.
3. In the Hardware Types list, click Modem and then click Next.
4. Put a checkmark in the box labeled "Don’t detect my modem: I will select it
from a list."
5. Click Next.
6. Click Standard Modem Types in the Manufacturers box.
7. Click any choice in the Models box and then click Next.
8. Click any choice for the port to use with the modem and then click Next.
9. If the Location Information dialog displays, enter your dialing information
and click Next.
10. Click Finish and then close the Control Panel window.
When you want to use the Console application, select:
Start | Agilent Advisor | ATM Analysis | 622Vu Advisor | Console
1: Installation and Configuration
1.5 Troubleshooting
24