Agilent Technologies 622Vu Advisor, User Manual

Page: 200 / 244

•
Click the Add button to add a new VCC.
This opens the window shown to the right:
Fill in the VPI/VCI to specify the channel
over which to transmit background traffic,
and the bandwidth to commit to traffic
sent over that VCC. Specify the band-
width as a percent of total available
bandwidth, using either the slider (right)
or one of the three fields shown
(Percentage, Cells/Sec, or Bits/Sec). All numeric values are in decimal
format.
•
Select a VCC and click the Remove button to delete it.
Options
There are two tabs in the Options panel. The Execution tab defines options
related to transmission of the session, while the Analysis tab defines options
related to the receipt and analysis of the session.
Use the Execution tab to specify:
•
Whether to transmit the test data
continuously, or only a specified
number of times.
•
The number of times to transmit the
test data (applicable if the
Continuous box is not checked).
•
The amount of time from the start of
one test to the start of the next test.
•
The number of acceptable failures;
that is, the number of failures after
which QoSMeter should discontinue testing. This field is used for long-term
testing, and refers only to internal failures on transmission.
12: Using QoSMeter
12.3 Defining a Round-Trip Delay (RTD) Session
200