Agilent Technologies 622Vu Advisor, User Manual

Page: 192 / 244

Mark if you want
622Vu Advisor to
identify test traffic
automatically
.
If you mark this field (it defaults to marked), all other fields on the tab are
disabled, for both test and background information. QoSMeter auto-detects the
test traffic in this case.
Defining Test Traffic
Click the Test Traffic tab and specify the percent of total bandwidth used to
transmit the test. This, in combination with the maximum test size, determines
how long each test takes to run.
Specify the bandwidth as a percent of total available bandwidth, using either the
slider (right) or one of the three fields shown (Percentage, Cells/Sec, or Bits/Sec).
All numeric values are in decimal format.
Defining Background Traffic
List of VCCs over which
to transmit background
traffic, and the percent of
total bandwidth to commit
to each.
Click when you’re through with the definition
(including General and Options tabs), to run the test.
Click to add background
traffic over a new VCC.
Click to remove the
selected VCC (and its
associated background
traffic).
Click the Background Traffic tab to specify any traffic you want to run
simultaneously with the test data. Specify this background traffic as a percent of
bandwidth to use for traffic sent over one or more specific VCCs (up to 16 VCCs
total). Use the buttons to the right to add and remove VCC specifications:
12: Using QoSMeter
12.2 Defining a Constant Bit Rate (CBR) Session
192