Agilent Technologies 622Vu Advisor, User Manual

Page: 111 / 244

Using the IP Tab During Subset Processing
Use the IP tab (illustrated on page 86) tab to include only those cells/PDUs
having specific IP addresses. You can specify source and/or destination
addresses, or combinations of source/destination addresses. By default, the
subset includes any (i.e., all) IP addresses.
1. Click Add to add an IP address (or pair of IP addresses) to the list. 622Vu
Advisor opens a dialog box that lets you specify a source and/or destination
address, as well as the direction of traffic flow (bi-directional or source-to-
destination).
You must specify each address explicitly, but you can select "any" or "****"
from either list, to request a match to any IP address for that field (e.g., to
match a specific source address to any destination address, or any source
address to a specific destination address). Click OK when you’re through to
add the address(es) to the IP list. The arrows under the Flow column indicate
the selected direction of flow.
2. To change an address (or pair of addresses), first select the address(es) from
the list, then click Edit. 622Vu Advisor prompts for the changes using a
window similar to the one described above for an add.
3. As necessary, select an address (or pair of addresses), then click Remove to
delete it from the IP list.
When you’re through with the IP tab, click OK to save your settings.
Using the Decode Tab During Subset Processing
Use the Decode tab (illustrated on page 87) to include only those cells/PDUs that
use a certain type of decode. By default, the subset includes all decodes.
1. Click Add to add a specific type of decode to the list. 622Vu Advisor opens
a dialog box that lets you enter a decode directly, or select one from the drop-
down list. Click OK when you’re through, to add the decode to the list.
If you specify a type of decode that isn’t in the drop-down list, 622Vu
Advisor accepts (and uses) it as entered. 622Vu Advisor does not try to
verify user-specified values.
2. Click All to add all the decodes available in the drop-down list.
3. As necessary, select a type of decode and click Remove to delete it from the
list.
When you’re through with the Decode tab, click OK to save your settings.
6: Capturing Incoming Traffic
6.3 Viewing Captured Traffic
111