Agilent Technologies 622Vu Advisor, User Manual

Page: 172 / 244

Review the information shown, then proceed as follows:
Click To…
New Define a new transmission script. (As an alternative to defining a transmission
script explicitly from scratch starting from this button, you can create a script from a
capture file. This feature is described in Chapter 6, starting on page 113.)
Edit Edit the selected script.
Remove Delete the selected script. 622Vu Advisor displays a verification window before
completing the request.
Run Execute the selected script (same as double-clicking that script).
Close Close the window.
If you request New or Edit processing, see Section 10.2 Creating or Editing a
Script on page 177. If you request Run, proceed to the next section for
instructions.
10.1 Running a Script
To initiate a script, select the script you want and click Run (or double-click the
script). 622Vu Advisor asks you to define the script’s master header properties,
and to identify the device from which to transmit the test.
1. Use the top-most panel to specify the script’s master header properties. Use
the check boxes to the far right to specify the format used for the header
fields (decimal or hexadecimal), and to indicate whether the force-HEC-state
property is defined.
Enter the properties as hexadecimal or decimal values to correspond to the
Decimal Header Format setting:
Master property values (inherited by
cells for which the corresponding
property is undefined at both the cell
and sequence levels).
Mark to save the script header
in the active cell library; leave
blank for one-time settings.
Make sure you’ve read Section 9.1 Inheriting Cell Characteristics on page
155 before assigning these values, and make sure you’re familiar with the
content and use of each field as it relates to ATM cells. The specific values
10: Running & Editing Scripts
10.1 Running a Script
172