Agilent Technologies 622Vu Advisor, User Manual

Page: 173 / 244

you can enter are described under Specifying Master Sequence Values on
page 158.
2. Mark the Save to Library check box if you want to save the header on the
active cell library; otherwise (for a one-time setting) leave it blank.
3. Select the analysis device where you want to run the script, from the list at
the bottom of the processing window. This list includes each device
available to you.
Select an analysis device then click
to monitor the script’s processing.
Click to check (then redisplay)
the status of each device.
Field Description
Card System name to identify each device, followed by a number (always 1).
Interface Type of connection supported between the analysis device and ATM device.
Status Always “Available,” indicating that the device is currently available for use.
Note: In order to execute a script, the analysis device must be configured as an active end
station. Refer to Chapter 4 for related configuration instructions, as necessary.
You can monitor the physical interface to the ATM device while the script
runs, as described in Chapter 5.
You’ll only see those devices that are available for use currently. If a
specific device is already performing RAM-intensive activity (such as a
capture), it won’t appear in the list. If you expect to see a device that isn’t
here, click the Refresh button to reevaluate its status.
After you select an analysis device and click OK, 622Vu Advisor opens a
Monitor Script window, through which you’ll control and monitor the actual
script execution:
10: Running & Editing Scripts
10.1 Running a Script
173