Agilent Technologies 622Vu Advisor, User Manual

Page: 203 / 244

⇒
Select those tests you want to graph from the Details display, then
choose Graph Selected Tests from the View menu. This results in a
graph of only the selected tests, plus one set of results showing the
average of all the selected tests (or, if you only select one test, the
average of all tests run so far in the session). It’s a good idea to disable
the Auto Update Graph capability when you graph selected tests.
⇒
Choose Auto Update Graph from the View menu. This results in a
graph that’s revised continuously, and that has two sets of numbers:
those showing the overall average of all tests, and those for the current
test.
Toolbar and Menu Commands
The toolbar lets you start/stop transmission of the session, or open the dialog box
used to specify the session properties. (Use of this properties dialog box is
described in Section 12.2 Defining a Constant Bit Rate (CBR) Session (starting
on page 188) and Section 12.3 Defining a Round-Trip Delay (RTD) Session
(starting on page 196).
Click to begin transmission of the
session using the current properties.
Click to stop the session.
Click to view/modify the
session properties.
If you stop the session (or it ends automatically), the elapsed-time field stops
counting. You can retransmit the session any number of times by simply clicking
the Start button. The elapsed-time field resets itself after a restart, as do the
statistics and graphs.
Other menu commands let you open a previously saved session, save the current
session, graph displayed information, etc. Refer to page 187 for a complete list
of menu and toolbar commands.
The rest of this section describes specific information available on the monitoring
display, first for Constant Bit Rate sessions, then for Round-Trip Delay sessions.
12: Using QoSMeter
12.4 Running a Session
203