Agilent Technologies 622Vu Advisor, User Manual

Page: 51 / 244

•
Click Save As to save the changes under a new name then load the new
profile. Use the standard Save dialog box to assign a name to the profile,
using the format name.prf. If you omit the suffix, 622Vu Advisor assigns it
correctly. Profiles can be stored anywhere, but typically reside in 622Vu
Advisor’s \profile directory.
Note: In addition to the settings described here, you can establish user-profile settings for use
during capture processing. These are edited differently, as described with the capture
facility (Chapter 6).
General Settings
Use the General tab to identify the default cell library for the profile, and the
default format in which to view (and enter) cell-header information:
Name of the active
profile (Display-only).
Cell library opened
when the profile loads.
Default format used to specify
and display cell-header
values.
•
Specify the Default Library as the name of the library to open when the
profile is loaded.
•
Specify the Header Format as either Hexadecimal or Decimal, indicating
the default format to use when displaying or entering the cell header
(VPI/VCI, PTI, etc.). As necessary, you can override this setting on each
window used to specify cell-header information.
Toolbar Settings
Use the Toolbars tab to enable or disable the display of the two toolbars, as well
as the associated bubble Help. If you enable the profile toolbar, you can identify
3: Getting Started
3.4 Setting Up User Profiles
51