manualshive.com logo in svg

Agilent Technologies 622Vu Advisor, User Manual

Share
Download
Agilent Technologies 622Vu Advisor User Manual Download Page 17

Step 6. - Install the Ethernet Card

The Xircom RealPort

TM

 CardBus Ethernet 10/100 Network Interface Card (NIC)

is supplied and supported for operation with the Agilent 622Vu Advisor.  Use the
following steps to install the card.

1.

 

Turn the Advisor on and wait for the Windows desktop to display.

2.

 

If this is a new Advisor, several screens prompt for information to complete
the configuration.  Answer the prompts.  At the Certificate of Authenticity
prompt, use the number located on the front cover of the Getting Started
Microsoft Windows 98 book shipped with your Agilent Advisor.

3.

 

Insert the Xircom CardBus card in the PC Card slot of the Advisor.

4.

 

If the drivers are not already installed, you should see several drivers being
installed.

Note: If a Version Conflict dialog displays a message that different versions
of files are being copied, read the message carefully and click the option to
keep the newer file.

5.

 

Wait for the New Hardware Found dialog to close.

6.

 

In the DHCP Client dialog, click No.

7.

 

Select Start | Settings | Control Panel and then double click the PC Card
(PCMCIA) icon.

8.

 

Click the Socket Status tab.

“Xircom CardBus Ethernet 10/100 Adapter – Socket 1” should be listed.

1:  Installation and Configuration

1.2 Installing 622Vu Advisor

17

Summary of Contents for 622Vu Advisor





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands