Agilent Technologies 622Vu Advisor, User Manual

Page: 198 / 244

Analysis Settings
Device over which to receive
and analyze the session
data.
VCC over which to
receive the session
data.
Click when you’re through with the definition (including
the Traffic Pattern and Options), to run the session.
Click the Analysis tab and specify the VPI/VCI over which to receive the
incoming session data. If you marked the Use the Same VCC for Analysis box in
the Generation tab, this field is pre-filled and cannot be changed.
Traffic Pattern Settings
The Traffic Pattern tab looks like this:
Size of each test.
Click when you’re through with the definition (including
General and Options tabs), to run the session.
Click the different tabs to
define specifications
relating to test or
background traffic.
Bandwidth to use for test traffic,
specified by shifting the slider or
entering one of the three numbers
shown.
Total percent of bandwidth
committed, for both test and
background traffic combined.
Use the area at the top to specify the number of cells in the test, in the range 1–
127,604. Then fill in the test and background traffic specifications, respectively
to define the bandwidth committed to test and background traffic. The analysis
12: Using QoSMeter
12.3 Defining a Round-Trip Delay (RTD) Session
198