Accu AXIOM Product Line Manual Download Page 49

Page: 49 / 230

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Electrical

Installation

04-AXIOM-AXIOM-X_Electrical_Installation_R10.doc

Accu-Sort Systems, Inc.

Conduit Connections to Wiring Base

Where the conduit meets with the wiring base, you will need to supply
the correct conduit fittings.

Use flexible conduit whenever possible to allow for range of motion
adjustments, especially when the UMB is used.

Once all conduit connections are completed, plug all unused wiring base
openings.

Plug Unused Wiring Base Openings

Three (3) wiring base

hole plugs

are supplied. Use these plugs on

unused openings. All unused openings MUST be plugged to maintain
IP54 rating. Use Teflon tape (or other thread sealant) when inserting the
hole plug in the conduit opening.

Conduit openings have 1/2-14 NPSC threads. Use an NPSC threaded
plug on all unused conduit openings. Tighten hole plug(s) with a 3/8" hex
wrench.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands