Accu AXIOM Product Line Manual Download Page 212

Page: 212 / 230

8.75

7.77

10.87

4.99

YAW AXIS

1.50

8.71

1.97

.328 X 1.83 SLOT

POWER SUPPLY NOT SHOWN FOR CLARITY

2.94

3.49

7.86

3.86

5.83

6.36

PITCH AXIS

SCAN PLANE

YAW

±22.5°

PITCH

50° UP MAX

130° DOWN MAX

SEE NOTE 1

ROLL

360°

SEE NOTE 2

N/A

INSTALLATION DRAWING - AXIOM 400

DWG NO.

CAGE CODE

SIZE

SHEET

SOLIDWORKS

CAD SYS.

NONE

53830

SCALE

105534

DATE

TJB

DRAWN

DATE

TWJ

TJB

MECH ENG

E-

CHKD

ENGR

DEPT.

CUSTOMER

CONTRACT #

05.06.03

05.12.03

05.06.03

TELFORD, PA 18969 USA

ACCU-SORT SYSTEMS, inc.

REVISIONS

CHANGES

DATE

05/19/09

ECO 09-214

REV

1 OF 3

ANGLULAR

X±1.00°

.X±0.10°

.XX±0.01°

[METRIC]

[X±2.500]

[.X±0.500]

[.XX±0.130]

[.XXX±0.013]

INCH

.X±.1000

.XX±.0200

.XXX±.0050

.XXXX±.0005

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES [MILLIMETERS]

ALL ANGLES ARE 90°

ALL C-CINKS ARE 82° INCLUDED ANGLE

ALL BEND RELIEFS TO SUIT

TOLERANCES:

FRACTIONS ±1/4
FT.,IN ±1"

THIS DOCUMENT IS PROVIDED FOR A

SPECIFIC PURPOSE AND THE DISCLOSED

INFORMATION REMAINS OUR PROPERTY.

IT MAY NOT BE DISCLOSED, COPIED,

OR REPRODUCED, EXCEPT FOR THE

SPECIFIC PURPOSE, WITHOUT ACCU-SORT’S

PRIOR APPROVAL. THIS NOTICE MUST

APPEAR ON ANY COPY OR REPRODUCTION

OF THIS DOCUMENT.

2001 ACCU-SORT SYSTEMS, INC.

THIS IS NOT A CONTROLLED COPY UNLESS

STAMPED “CONTROLLED COPY” IN RED

REMOVE SHARP EDGES AND BURRS

NOTES:

1) WHEN UNOBSTRUCTED AND WITHOUT POWER SUPPLY.

WITH POWER SUPPLY DOWNWARD TRAVEL IS LIMITED TO 105°.

OTHER OBSTRUCTIONS MAY LIMIT TRAVEL.

2) WHEN MOUNTED ON ACCU-SORT STRUCTURAL EXTRUSION.

RE-POSITIONING OF MOUNTING BOLTS MAY BE REQUIRED.

REFERENCE DRAWINGS:

104664 MECHANICAL SPECIFICATION DRAWING - AXIOM400 SCANNER

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands