manualshive.com logo in svg

Accu AXIOM, Product Line Manual

Introducing Accu AXIOM, the ultimate Product Line Manual offering comprehensive guidance for every user. Download this invaluable manual for free at manualshive.com and unlock a wealth of knowledge to maximize your product experience. Whether troubleshooting or exploring new features, this manual is a must-have resource for all Accu AXIOM owners.

Share
Download
background image

118 Operations 

AXIOM

™

 / AXIOM-X

™

 Product Line Manual

 

 

Accu-Sort Systems, Inc. 

06-AXIOM-AXIOM-X_Operations_R10.doc 

First-time Setup 

AXCESS Setup Software for AXIOM,

 functioning under the familiar 

Windows

®

 operating system on your computer, is the tool you will use to 

define operating parameters, set bar code type / length, and construct output 
messages, including filtering, stripping and padding capabilities. AXCESS 
enables you to easily configure, fine-tune, and monitor your reader’s 
operations, allowing you to program it to fit your application seamlessly.

 

AXCESS provides ease-of-use regardless of your experience with bar code 
readers. A beginner follows basic setup procedures for a standard 
configuration. If you are more experienced, use the advanced setup features 
that allow access to more complex options. In either case, the user-friendly 
AXCESS Wizard efficiently guides you through a sequence of screens until 
the reader is configured to fit your application.

 

 

To setup your AXIOM / AXIOM-X bar code reader: 

 

1.  Install AXCESS on the computer you will use to setup your reader. 

2.  Connect the programming setup cable to the reader’s setup port. 

3.  Connect the programming setup cable to your computer. 

4.  Apply power to the reader. 

5.  Set configuration parameters using AXCESS for bar code 

symbologies, trigger, tracking, and communications (serial, Ethernet, 
and I/O). 

(See Chapter 5.)

 

6.  Check operations using the Test Mode. 

 

 

Check Operations using Test Mode 

 

NOTE:

 Perform the following test using a bar code that matches the 

default parameters. You can also perform this test after configuring the 
AXIOM to your specifications. If the default parameters have been changed, 
you must enable the control panel buttons and the other 

default 

parameters

 listed. 

See Modify > AXIOM Configuration and Modify > Bar 

Code Setup.

 

 

To quickly check AXIOM operation: 

1.   Apply power to the reader. 

2.  Position a test bar code symbol approximately 20 inches [508 mm] from 

the reader.  Skew the bar code symbol slightly. 

3.  Press the Test/Diagnostics button on the control panel to initiate test.

 

 

4.  The laser(s) should be scanning continuously during normal operations. 

(Observe the laser safety warnings in Chapter 2. If it becomes necessary 
to shutoff the laser(s), follow procedure outlined in Chapter 7.) 

5. 

Observe the bar graph LEDs on the AXIOM-X control panel.  The bar 
graph LEDs illuminate when the reader is scanning and decoding the bar 
code symbol. 

(See page 120.) 

Summary of Contents for AXIOM







































































































































































































































Reviews:

No comments

Related manuals for AXIOM

M3 Mobile Wearable Ring Scanner User Manual preview
Wearable Ring Scanner
Brand: M3 Mobile Pages: 35
Addonics Technologies AEIDDSAU Manual preview
AEIDDSAU
Brand: Addonics Technologies Pages: 1
Stanley PAC GS3-MT Installation Manual preview
PAC GS3-MT
Brand: Stanley Pages: 48
Billow E01FL User Manual preview
E01FL
Brand: Billow Pages: 90
Motorola USB 2.0 SD Quick Start Manual preview
USB 2.0 SD
Brand: Motorola Pages: 44
Amazon KINDLE DX FREE 3G Quick Start Manual preview
KINDLE DX FREE 3G
Brand: Amazon Pages: 1
Assmann DA-70316-1 User Manual preview
DA-70316-1
Brand: Assmann Pages: 9
Albasca FUNK MK-5120ZBe Quick Start Manual preview
FUNK MK-5120ZBe
Brand: Albasca Pages: 2
Wise WA-CX02 Quick Start Manual preview
WA-CX02
Brand: Wise Pages: 10
Opticon OPI-2101 Quick Start Manual preview
OPI-2101
Brand: Opticon Pages: 4
Opticon OPL-9725 Demo Application Manual preview
OPL-9725
Brand: Opticon Pages: 4
Welch Allyn Scanteam 3700PDF Technical Manual preview
Scanteam 3700PDF
Brand: Welch Allyn Pages: 83
E-Films E-MCR User Manual preview
E-MCR
Brand: E-Films Pages: 8
Kaba Access manager 92 32 Technical Manual preview
Access manager 92 32
Brand: Kaba Pages: 53
Gallagher T15 Mifare Reader Black Custom Installation Notes preview
T15 Mifare Reader Black
Brand: Gallagher Pages: 13
Pandigital Novel 7 User Manual preview
Novel 7
Brand: Pandigital Pages: 70
gobii EBK2835-PIA Instruction Manual preview
EBK2835-PIA
Brand: gobii Pages: 15
Feig Electronic PAN MOBILE ID ECCO Lite User Manual preview
PAN MOBILE ID ECCO Lite
Brand: Feig Electronic Pages: 23

Brands by name

Popular brands

Load more brands