Accu AXIOM Product Line Manual Download Page 216

Page: 216 / 230

MOUNTING HARDWARE INCLUDED

WITH AXIOM WIRING BASE ASSEMBLY

POWER SUPPLY

0105914001/002

X-PATTERN MOUNTING BRACKET KIT

0106226001

AXIOM400 LASER SCANNER

BRACKET MOUNTING HARDWARE INCLUDED

WITH MOUNTING BRACKET KIT

HARDWARE INCLUDED WITH

MOUNTING BRACKET KIT

HARDWARE INCLUDED

WITH MOUNTING BRACKET KIT

N/A

ARRANGEMENT - AXIOM400

INSTALLATION DRAWING, X-PATTERN MOUNTING

DWG. NO.

53830

CAGE CODE

2 OF 2

SOLIDWORKS

NONE

CAD SYS.

DATE

SIZE

DATE

MECH ENG

12.02.03
11.19.03

11.19.03

DRAWN

CHKD

ENGR

DEPT.

CUSTOMER

TJB

E-

SCALE

CONTRACT #

TELFORD, PA 18969 USA

ACCU-SORT SYSTEMS, inc.

SHEET

REMOVE SHARP EDGES AND BURRS

FT.,IN ±1"

FRACTIONS ±1/4

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES [MILLIMETERS]

ALL ANGLES ARE 90°

ALL C-CINKS ARE 82° INCLUDED ANGLE

ALL BEND RELIEFS TO SUIT

TOLERANCES:

INCH

.X±.1000

.XX±.0200

.XXX±.0050

.XXXX±.0005

[METRIC]

[X±2.500]

[.X±0.500]

[.XX±0.130]

[.XXX±0.013]

ANGLULAR

X±1.00°

.X±0.10°

.XX±0.01°

- -

PART NO.

STAMPED "CONTROLLED COPY" IN RED

THIS IS NOT A CONTROLLED COPY UNLESS

2001, ACCU-SORT SYSTEMS, INC.

OF THIS DOCUMENT.

APPEAR ON ANY COPY OR REPRODUCTION

PRIOR APPROVAL. THIS NOTICE MUST

SPECIFIC PURPOSE, WITHOUT ACCU-SORT'S

OR REPRODUCED, EXCEPT FOR THE

IT MAY NOT BE DISCLOSED, COPIED,

INFORMATION REMAINS OUR PROPERTY.

SPECIFIC PURPOSE AND THE DISCLOSED

THIS DOCUMENT IS PROVIDED FOR A

REVISION

TJB/PAP

ECO

DATE

06.22.04

ECO 04-424

REV

106227

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands