Accu AXIOM Product Line Manual Download Page 130

Page: 130 / 230

130 Operations

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

06-AXIOM-AXIOM-X_Operations_R10.doc

Scanning Array / Tunnel Operations

When two multi-reader AXIOM networks are coupled to function in the same
scanning area, the entire application is called a scanning array or tunnel.

NOTE:

Due to the complexity of these applications, tunnel arrays are

typically custom-engineered to your specifications.

Setup Functions for Controller

Modify > AXIOM Configuration - Reader Name (Controller)

Network Settings - # of Client Readers, IP address, and Group #

Setup Functions for Clients

Modify > AXIOM Configuration - Reader Name (Client 1,2,3,4,5)

Network Settings – IP address and Group #

See Chapter 5 for details.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands