Accu AXIOM, Product Line Manual

Page: 93 / 230

AXIOM
™
/ AXIOM-X
™
Product Line Manual
Setup 93
05-AXIOM-AXIOM-X_Setup_R10.doc Accu-Sort Systems, Inc.
Message Content
The message drop-down lists define the message options for each bar code.
The message content can be defined for transmissions from the AXIOM’s
serial port #1 as well as any network connection (via Net#1). These
messages are based on various conditions. For each condition, there are
options for what message can be sent. These options include:
Send Bar Code – Bar code (with padding and/or stripping) is sent.
Repeated Character
– Send a message consisting of the specified
character repeated for the minimum number of characters for the bar code
(example is “???????” no-read message).
User Specified Message – Send a message defined string for this
condition.
User Defined Message Content
Selection Definition
Category #1:
These first three conditions are mutually exclusive, so only one of
these three messages can be sent for any bar code.
Read
If “No Message” is selected, nothing is sent for a valid read;
otherwise either the bar code or a user-specified message
is sent.
No Read If “No Message” is selected, nothing is sent for a no-read;
otherwise either the specified “repeated character” or the
user specified message is sent.
Multiple Bar Code If “No Message” is selected, a multiple bar code condition
will be reported as a “Read” of the first bar code reported.
Otherwise, the specified “repeated character” or the user-
specified message is sent.
Category #2: The next three conditions are IN ADDITION to the conditions
specified above. If a condition in both categories is met, these messages will be
appended. If you desire to only generate a message based on these conditions, all
messages in Category #1 should be disabled.
Match
If the bar code matches any of the match codes, this
message is sent. Options include sending the bar code or
a user specified message.
No Match If the bar code does not match any of the match codes (or
was a no-read), this message is sent. Options include
sending a “repeated character” or a user specified
message.
No Match Read If a valid bar code was read, but it does not match any of
the match code, this message is sent. Options include
sending the bar code or a user specified message.
Append QQ (code
quality) to message
(checkbox)
When selected a two digit “code quality” indication (number
from 00 to 99) is appended to the bar code message. The
code quality value is separated from the message with the
specified separator.
Heart Beat Message When enabled, if no other message is sent for the specified
period of time, the specified heart beat message string is
sent. (A time-out of zero disables this option.)
Heart Beat Time Out
(0-30,000 ms) 0 = Disable Heart Beat message
1-30,000 = Delay before sending Heart Beat message