Accu AXIOM Product Line Manual Download Page 41

Page: 41 / 230

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Mechanical

Installation

03-AXIOM-AXIOM-X_Mechanical_Installation_R10.doc

Accu-Sort Systems, Inc.

Safety during AXIOM-X Scan Head Installation

CAUTION:

Although the scan head only weighs 14.5 lbs [6.6 kg] proper lifting

techniques are still required to avoid the potential for back injuries.

Top Read Installation with Overhead Space

1. Install scan head onto wiring base with the

mounting bracket adjusted as shown.

2. Tighten the four screws that hold the scan

head to the wiring base.

3. Adjust mounting bracket angle

downward

meet the required application setup.

Direction of Conveyor Travel

(Top Read)

Top Read Installation with Limited Overhead Space

1. Install scan head onto wiring base with

the mounting bracket adjusted as
shown

Use upper body to stabilize scan head

as you tighten the four screws that hold
it to the wiring base.

3. Adjust mounting bracket angle to

required application setup.

Direction of Conveyor Travel

(Top Read, limited space)

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands