Accu AXIOM Product Line Manual Download Page 39

Page: 39 / 230

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Mechanical

Installation

03-AXIOM-AXIOM-X_Mechanical_Installation_R10.doc

Accu-Sort Systems, Inc.

Installing an AXIOM-X Scan Head

Perform the electrical installation as outlined in

Chapter 4

. Once all wiring is

checked for accuracy, install the AXIOM-X scan head to the wiring base.

You can install the scan head with or without the power disconnected from
the wiring base.

To install a scan head:

1. Make sure the insulating cover is in position, so the flap covers the field

wiring connections inside the wiring base.

2. Use

the

Safety during AXIOM-X Scan Head Installation

procedures.

3. Carefully align the scan head alignment pins with the 3 holes in the

wiring base.

This assures the correct scan head-to-wiring base

connector alignment (to avoid bending pins).

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands