Accu AXIOM Product Line Manual Download Page 163

Page: 163 / 230

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Service

163

09-AXIOM-AXIOM-X_Service_R10.doc

Accu-Sort Systems, Inc.

Replacing a Wiring Base

1. Remove power from reader.

2. Unplug power supply from source.

3. Remove the scan head from wiring base.

4. Disconnect all cabling from wiring base terminal blocks.

5. Remove wiring base from UMB/mounting structure.

6. Install wiring base replacement to UMB/mounting structure.

7. Re-connect all wiring to terminal blocks in replacement wiring base.

8. Check power polarity (LED in wiring base).

9. Optional, if used: Check photoeye operation (LED in wiring base).

10. Optional, if used: Check tachometer operation (LED in wiring base).

11. Install the scan head to wiring base.

12. Follow procedure in Chapter 5 to confirm operation.

13. Optional: Backup scan head parameters to wiring base. This assures the

parameters are available if the scan head ever needs to be replaced.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands